Guide · Approach and landingThe stabilized
approach.

A settled approach gives you time to judge the landing. Here’s what to look for as you approach the runway, and when to go around for another attempt.

What a stabilized approach is

An approach is stabilized when the aircraft is on the right path, at the right speed, in the landing configuration and with a steady, modest rate of descent. Airlines check this at a gate: usually 1,000 feet above the runway in instrument conditions and 500 feet in visual conditions, though each operator sets its own.

The usual criteria

  • Configured: gear down and landing flaps set.
  • On speed: close to your approach speed (Vref plus an additive for wind), not slower and not much faster.
  • Sink rate: no more than about 1,000 feet per minute, unless the approach calls for more.
  • On path: on the glideslope or the published descent path, and lined up with the runway.
  • Stable to touchdown: only small corrections from the gate to the flare.

These criteria follow Flight Safety Foundation guidance. If the approach is unstable at the applicable gate, go around.

How to fly it in MSFS

  1. Plan the descent. A rough rule is three miles of track for every 1,000 feet to lose, plus room to slow down. Starting late can leave you trying to slow down and descend at the same time.
  2. Slow down early. Be at your initial approach speed with the first flaps out before you join the final approach.
  3. Gear and flaps by 1,500 feet. Leave yourself time to settle before the gate.
  4. Check at the gate. Say it out loud if it helps: configured, on speed, on path, sink rate. Then decide: land or go around.
  5. Keep it steady. Aim for small corrections. If you need large or repeated changes to stay on the approach, reassess whether it’s stable.

When to go around

In the real world, a go-around from an unstable approach is good airmanship. Skyfarer records go-arounds so you can review them in the debrief.

How Skyfarer checks your approach

Depending on the aircraft’s available readings, the debrief can show checks for gear, flaps, approach speed and sink rate. Checks with missing readings are left out of the score.

Related

Start your career See the full tour